日韩欧美一区二区在线观看_国产一级视频在线播放_欧美黑人狂野猛交老妇_中文区中文字幕免费看_这里只有精品99re_www.国产精品

European fuel dispenser standards are governed by a combination of EN (European Norms) and ATEX directives, ensuring safety, accuracy, and environmental compliance. Below is a synthesis of core standards and their requirements:

1. EN 13012:2021

Title: Petrol Filling Stations - Construction and Performance of Automatic Nozzles for Use on Fuel Dispensers
Scope:

• Applies to automatic nozzles for dispensing liquid fuels (e.g., petrol, diesel) and aqueous urea solutions at flow rates ≤200 L/min.

• Covers safety, environmental, and performance requirements.

Key Requirements:

• Leakage Control: Nozzle seals must prevent fuel leakage under pressure (tested at 400 kPa for 30 seconds).

• Vapor Recovery: Compatible with Stage II vapor recovery systems (if applicable).

• Material Stability: Components must resist corrosion from fuels (tested per ISO 9328).

• Electrical Safety: Compliance with EN 60079-14 for explosion-proof wiring .

2. EN 14678-2:2012

Title: LPG Equipment and Accessories for Automotive Filling Stations - Part 2: Components Other Than Dispensers
Focus:

• Shear Valves: Mandatory installation to prevent fuel spills during collisions.

• Swivels: Ensure leak-proof connections between hoses and dispensers.

Key Requirements:

• Shear Valves: Must activate at ≤500 N force to disconnect fuel flow.

• Pressure Testing: Components must withstand 1.5× maximum working pressure for 10 minutes .

3. EN 13617-3:2012

Title: Petrol Filling Stations - Part 3: Safety Requirements for Construction and Performance of Swivels
Scope:

• Applies to swivels used in fuel dispensers for vehicles, boats, and portable containers.

Key Requirements:

• Electrical Safety: Enclosures must meet IP54 protection against dust/water.

• Leakage Limits: Internal leakage ≤4 L/hour, external leakage ≤1 L/hour during pressure tests .

4. ATEX Directive 2014/34/EU

Title: Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres
Scope:

• Mandatory for fuel dispensers in explosive environments (e.g., petrol stations).

Key Requirements:

• Equipment Classification:

• Zone 1: Devices must be Ex ia (intrinsically safe) or Ex ib (increased safety).

• Zone 2: Ex nA (non-sparking) or Ex ec (energy-limited) acceptable.

• Marking: CE + Ex symbol (e.g., Ex ia IIB T4) .

5. EN 60079-14:2019

Title: Explosive Atmospheres - Part 14: Electrical Installations Design, Selection, and Erection
Focus:

• Guidelines for installing explosion-proof electrical systems in fueling stations.

Key Requirements:

• Wiring: Use of armored cables for hazardous areas.

• Grounding: Resistance ≤10 Ω for static discharge prevention.

6. EN 12891:2017

Title: Petrol Filling Stations - Safety Requirements for Fuel Dispensers
Scope:

• Comprehensive safety standards for dispenser design and operation.

Key Requirements:

• Anti-Tampering: Mandatory self-locking mechanisms to prevent unauthorized calibration.

• Display Accuracy: Fuel quantity must be legible from 2 m distance under sunlight.

7. EN 16709:2015

Title: Automotive Fuels - High FAME Diesel (B20 and B30) - Requirements and Test Methods
Scope:

• Applies to biodiesel blends (B20/B30) in dispensers.

Key Requirements:

• Corrosion Resistance: Components must pass 720-hour salt spray tests.

• Material Compatibility: Hoses and seals must resist biodiesel degradation.

Compliance and Certification

• CE Marking: Mandatory for all fuel dispensers sold in the EU.

• ATEX Certification: Required for explosion-proof components.

• Testing Bodies: Accredited labs (e.g., TÜV, SGS) perform conformity assessments.

Accessing Standards

1. Official Sources:

• Purchase from CEN (European Committee for Standardization) or BSI Group.

2. Third-Party Translations:

• Engage ISO-certified translators for technical accuracy (e.g., terms like "Ex ia IIB T4").

• China fuel dispenser (https://www.cnruijia.com),professional fuel dispenser manufacturer.

Key Differences from Non-European Standards

For detailed implementation, refer to the full texts of EN 13012, EN 14678-2, and ATEX 2014/34/EU.